How to Repair a Mac Mini: The Tools You Need
For Apple Certified Macintosh Technicians (ACMT) one of the most important day-to-day tasks is making sure you have the correct tools to carry out repairs at hand. With the vast range of models knowing what tools to set out for each repair isn’t as easy as it sounds. Over the next weeks I will give you a brief look at the list of tools required for Qualified Technicians to Repair each Mac Model.
Most of the tools are available from most hardware/DIY Stores. A small range are Apple Specific Tools and these can be purchased direct from Apple.
• Nylon Probe Tool/Black Stick (922-5065)
- Jewelers #0 Phillips Screwdriver
- Jewelers #1 Phillips Screwdriver
- Phillips #2 Screwdriver
- Needlenose Pliers
- Putty Knife
- Torx T6, Magnetized
- Torx T8, Magnetized
- Torx T9, Magnetized
- 2mm Hex Wrench
- #0 Phillips Screwdriver
- Logic Board removal Tool
You may find the need for some additional tools, which are optional, but above is the minimum required to do the full range of repairs.
NOTE – The Apple Certified Macintosh Technician (ACMT) course that we run here at Amsys will not only train you to repair Apple Macintosh Products, but will also discuss in depth these tools and which products require which tools. (It is very important that you have adequate knowledge of ESD safety and the ESD equipment required, which is also described in detail in the ACMT course).
By Russell Harris & Daryl McCartney